16G Nose Hoop Ring Septum Ring Clear CZ Daith Earring Surgical

A 16G steel hinged segment clicker with front-facing cubic zirconia stones along the outer curve, sized at 10mm inner diameter.

$9.49 at our storefront

The numbers on this piece
Gauge	16G	1.2mm
Lengths or inner diameters	8mm / 10mm	the listing carries more than one
Material	316L surgical steel
This page	16G-10MM- Front Face CZ-Steel	other finishes sit on their own pages

Match the gauge, not the look

Gauge is the number that decides whether a piece goes through at all, and it should match what your piercer put in. If you are not sure of yours, ask them rather than guessing from a photograph.

About this piece

Clear cubic zirconia stones face forward along the curve of this hinged segment hoop. We make it from 316L surgical steel, machine-polished along every contact edge so it slides through smoothly. The gauge should match what your piercer used.

Details

Sixteen gauge post

The post is 16G, which measures 1.2mm across. It gives the ring solid structure while fitting piercings started at standard needle thickness, from septum channels to cartilage placements.

Ten millimeter diameter

This option has an inside diameter of 10mm, or three eighths of an inch. That inner span leaves clearance for thicker daith folds, conch rims, and standard septum depths.

Front-facing clear stones

We set clear cubic zirconia stones directly into the outer face of the steel. They point straight outward when worn in ear cartilage or septum placements rather than rolling to the side.

Hinged segment click

The curved segment swings open on a tight pivot pin and snaps back into place. You get a secure closure that stays shut without loose beads or captive balls to drop.