4Pairs 18G Surgical Steel Hinged Clicker Segment Nose Rings Hoop Helix

4.3 from 4,749 ratings

Our 18G hinged segment hoops in 316L steel and gold tone come in four inner diameters across eight total pieces.

$9.89 at our storefront

The numbers on this piece
Gauge	18G	1mm
Wire thickness, as we state it	1mm
Lengths or inner diameters	6mm / 8mm / 10mm / 12mm	the listing carries more than one
Material	316L surgical steel
Sold as	4 pairs
This page	18G - Steel/Gold - 6mm-12mm -8Pcs	other finishes sit on their own pages

Match the gauge, not the look

Gauge is the number that decides whether a piece goes through at all, and it should match what your piercer put in. If you are not sure of yours, ask them rather than guessing from a photograph.

About this piece

We machined these clicker hoops with an integrated hinge that snaps shut firmly by hand. Each eight-piece set includes steel and gold-tone finishes across four inner diameters: 6mm, 8mm, 10mm, and 12mm. The 18G thickness measures 1.0mm, so match this gauge to what your piercer used.

Details

Precision 18G thickness

We turn the wire to 1.0mm thickness, which corresponds to 18G. It sits between standard earring posts and heavier body wire. The rounded post passes through without rough edges.

Hinged segment closure

The swinging segment clicks directly into the hoop channel. You hear it lock into place, with no loose balls or separate tools required when putting it on.

Steel and gold finishes

We polish the 316L surgical steel to a mirror finish. The set pairs classic raw steel with gold-tone plating across four matched pairs, giving you eight hoops in total.

Four inner diameters

The pack covers four distinct inner ring sizes: 6mm, 8mm, 10mm, and 12mm. Smaller rings hug close on tragus or nostril placements, while larger diameters leave room on conch or lobes.