4Pcs 18G Surgical Steel Hinged Clicker Segment Nose Rings Hoop Helix

4.3 from 4,678 ratings

Four 18G hinged clicker hoops in 316L surgical steel with smooth polished edges and an easy snap closure.

$8.49 at our storefront

The numbers on this piece
Gauge	18G	1mm
Wire thickness, as we state it	1mm
Lengths or inner diameters	6mm / 12mm	the listing carries more than one
Material	316L surgical steel
Sold as	4 pieces

Match the gauge, not the look

Gauge is the number that decides whether a piece goes through at all, and it should match what your piercer put in. If you are not sure of yours, ask them rather than guessing from a photograph.

About this piece

We machine these 18 gauge hoops from 316L surgical steel with a smooth high polish along every curve. The hinged segment snaps shut by hand without loose beads or tools. Match the 1.0mm thickness to what your piercer put in so the hoop sits clean in your channel.

Details

Hinged clicker mechanism

The segment swings open on a small hinge pin and clicks firmly back into place. You can insert or remove the hoop with your fingers, so there is no loose ball to drop down the sink during changes.

Solid 316L steel

We build these from solid 316L surgical steel, described as hypoallergenic in the specifications. The metal holds a bright polished finish that cleans easily with warm water and a soft cloth.

Eighteen gauge thickness

At 18G or 1.0mm wire thickness, these rings suit established nostril, septum, cartilage, daith, tragus, and lobe channels. Pick the inner diameter that matches your placement depth.

Four hoop assortment

This pack contains four individual steel clicker hoops across 6mm to 12mm diameters. Having several sizes lets you fit snug tragus placements as well as roomier daith or lobe piercings.