3Pcs 16G 8mm 10mm Hinged Clicker Segment CZ Twisted Clicker Nose

5 from 6 ratings

Three 16G steel clicker hoops in an 8mm inner diameter, featuring smooth, twisted, and cubic zirconia segment designs.

$9.99 at our storefront

The numbers on this piece
Gauge	16G	1.2mm
Wire thickness, as we state it	1.2mm
Lengths or inner diameters	8mm / 10mm	the listing carries more than one
Material	316L surgical steel
Sold as	3 pieces
This page	Steel, 8	other finishes sit on their own pages

Match the gauge, not the look

Gauge is the number that decides whether a piece goes through at all, and it should match what your piercer put in. If you are not sure of yours, ask them rather than guessing from a photograph.

About this piece

A trio of hinged rings built from 316L surgical steel, sized at 16G (1.2mm) with an 8mm inner diameter. Each piece uses a snapping segment that closes securely by hand, eliminating loose beads. Match your current piercing gauge to ensure these sit cleanly in your septum, nostril, or cartilage.

Details

Sixteen gauge dimensions

The 1.2mm wire thickness and 8mm inner diameter make a compact circle. Gauge should match what your piercer put in so the post rests easily inside the channel without stretching or binding.

Hinged segment closure

Each hoop opens on a small pin hinge and clicks shut into the opposite post. You do not need tools or separate capture balls that can slip away while you change your look.

Three distinct textures

This set includes three steel pieces: a plain polished ring, a twisted rope pattern, and a segment set with cubic zirconia stones. All three share the exact same 16G 8mm profile for consistent fit.

Surgical steel build

We machine these from 316L surgical steel with a smooth polished surface. Wipe each hoop with a clean, dry cloth before storing to keep the metal bright and free of residue.