16G Surgical Steel Hinged Clicker Segment Nose Rings Hoop Helix Cartilage

4.5 from 404 ratings

Gold tone 16G hinged clicker hoops in 316L surgical steel, sized from 6mm to 14mm inner diameter in a ten piece set.

$9.99 at our storefront

The numbers on this piece
Gauge	16G	1.2mm
Wire thickness, as we state it	1.2mm
Lengths or inner diameters	6mm / 14mm	the listing carries more than one
Material	316L surgical steel
Sold as	10 pieces

Match the gauge, not the look

Gauge is the number that decides whether a piece goes through at all, and it should match what your piercer put in. If you are not sure of yours, ask them rather than guessing from a photograph.

About this piece

We machine these 16G hoops from 316L surgical steel with a smooth gold finish. The hinged segment snaps shut with a firm click so you have no loose balls to drop. Match the 1.2mm wire thickness to what your piercer put in, then choose the inner diameter that fits your placement.

Details

Hinged segment closure

The curved bar swings open on an integrated pin and clicks directly into the channel. It stays secure without tiny beads or separate tools, leaving the outside of the ring smooth.

Gold tone surgical steel

We machine the base wire from solid 316L surgical steel before applying the gold tone finish. The metal takes a clean polish that wipes clean with a soft cloth.

Ten piece diameter assortment

The set includes ten rings covering inner diameters from 6mm up to 14mm. This range covers snug cartilage spots like the tragus or daith, as well as wider lobe and lip placements.

Standard 16G wire profile

Each ring uses 1.2mm wire, which corresponds to standard 16 gauge. The ends are rounded smooth so the post slides through established channels without rough edges.