16G 18G 6mm 8mm 10mm Hinged Clicker Segment CZ Twisted Clicker

5 from 1 ratings

Hinged segment hoops in 18G surgical steel with clear cubic zirconia rows and twisted steel detail in an eight millimeter diameter.

$12.49 at our storefront

The numbers on this piece
Gauge	16G / 18G	1.2mm / 1mm
Lengths or inner diameters	6mm / 8mm / 10mm	the listing carries more than one
Material	316L surgical steel
Sold as	3 pieces
This page	18G - 8mm - 3Pcs Steel - 2 Layer	other finishes sit on their own pages

Match the gauge, not the look

Gauge is the number that decides whether a piece goes through at all, and it should match what your piercer put in. If you are not sure of yours, ask them rather than guessing from a photograph.

About this piece

We build this three piece set in 316L surgical steel with an 18 gauge post and an 8mm inner ring diameter. Each hoop swings open on an integrated joint and snaps shut into the channel. You get distinct profiles across the three pieces, pairing twisted bands with clear AAAA+ cubic zirconia stones.

Details

Eight millimeter diameter

This 8mm inner diameter is matched with an 18G post, which measures 1.0mm thick. The gauge should match what your piercer put in so the wire sits correctly without pulling in the channel.

Integrated clicker hinge

The hinged segment swings wide on a smooth pin and clicks back into the bar. You get a firm closure without loose beads or segment pieces that slip out of your fingers over the sink basin.

316L surgical steel build

We machine the posts from solid 316L surgical steel, finished with polished edges along the entire curve. The metal contains no nickel, lead, or cadmium, and wipes clean with a soft dry cloth.

Layered CZ and twist profiles

Each hoop in the set carries a different exterior detail, from double layered rows of prong-set AAAA+ cubic zirconia to twisted steel bands. The stones sit flush along the outer curve for steady sparkle.